🛡️ FREE IPM GUIDE

Complete Pest & Disease Management Guide

Professional IPM strategies, product recommendations, and treatment protocols for every common pest and disease. Prevention is 90% of the battle—learn to scout, identify, and treat problems before they destroy your crop.

15+ Pests Covered

20+ Treatment Products

FREE Diagnostic Tool

🌱 Need Help? We've Got You!

Call our Growers Hotline for expert advice or chat with our grow experts 24/7

Call Growers Hotline 💬 Chat with Master Grower

🐛 Common Insect Pests

Identification, lifecycle, damage symptoms, and treatment protocols using products we carry

🕷️

Spider Mites

HIGH THREAT

🔍 Identification

Tiny dots (0.5mm) on leaf undersides, often red or brown. Fine webbing in late-stage infestations. Look for tiny moving specks with magnification. Stippling (white/yellow spots) on top of leaves.

⚠️ Damage Symptoms

Stippling (white dots) on leaf surface
Leaves turn yellow/bronze and die
Fine webbing between branches (severe)
Reduced photosynthesis → stunted growth

🔄 Lifecycle

Egg to adult in 5-7 days at 80°F. Females lay 100+ eggs. Population explodes in hot, dry conditions. Can go dormant in cool temps.

💊 Treatment Protocol

Prevention: Athena IPM (weekly in veg), maintain proper VPD, avoid over 80°F.

Active Infestation: Lost Coast Plant Therapy (every 3 days, 3-4 applications). SNS 217 (systemic, soil drench). Rotate products to avoid resistance.

Biological Control: Persimilis predatory mites (release 5-10 per plant). Californicus for preventive control. Amblyseius fallacis for broad-spectrum.

⚠️ Critical: Spray leaf undersides thoroughly. Mites hide underneath. NEVER spray after week 3 of flower.

🦟

Fungus Gnats

MEDIUM THREAT

🔍 Identification

Small black flies (2-3mm) around soil surface. Fly when soil is disturbed. Larvae are translucent white worms (5mm) in top 2" of soil with black heads.

⚠️ Damage Symptoms

Larvae eat root hairs → slowed growth
Seedlings most vulnerable (can kill)
Adults spread disease (Pythium, Fusarium)
Stress in young plants

🔄 Lifecycle

Egg to adult in 3-4 weeks. Larvae feed on organic matter and roots for 2 weeks. Adults live 7-10 days, lay 200 eggs in moist soil.

💊 Treatment Protocol

Top Choice: Mosquito Bits or Gnatrol (BTI - Bacillus thuringiensis). Top-dress or tea drench. Kills larvae, not adults.

Physical Control: Diatomaceous earth (DE) on soil surface. Yellow sticky traps for adults (monitoring + control).

Biological: Stratiolaelaps scimitus (predatory mites that live in soil). Release 10 per sq ft. Long-term prevention.

Prevention: Let top 1-2" dry between waterings. Avoid overwatering. Remove dead leaves from soil.

🦗

Thrips

HIGH THREAT

🔍 Identification

Tiny (1-2mm) elongated insects, black or yellow. Fast-moving. Look for silver scarring on leaves, black fecal spots. Check new growth and flowers.

⚠️ Damage Symptoms

Silver/bronze scarring on leaves (rasping damage)
Black dots (feces) on damaged areas
Deformed new growth, curled leaves
Spread viruses (TSWV, INSV)

🔄 Lifecycle

Egg to adult in 2-3 weeks. Pupate in soil/leaf litter. Adults fly and spread rapidly. Hard to control because they hide in buds.

💊 Treatment Protocol

Systemic: SNS 209 (rosemary oil, systemic through roots). Drench every 3-5 days for 2-3 weeks.

Foliar: Lost Coast Plant Therapy, Athena IPM, Spinosad (organic, flower-safe until week 3).

Biological: Amblyseius cucumeris (predatory mites), Orius insidiosus (minute pirate bug). Release early, preventively.

Critical: Blue sticky traps for monitoring. Spray/drench SOIL too (pupae). Difficult to eradicate once established.

🐛

Aphids

MEDIUM THREAT

🔍 Identification

Small (2-4mm) soft-bodied insects, green/yellow/black. Cluster on new growth, undersides of leaves, stems. Sticky honeydew secretion attracts ants.

⚠️ Damage Symptoms

Curled, yellowed leaves
Sticky honeydew → sooty mold (black fungus)
Stunted growth, deformed shoots
Spread viruses between plants

🔄 Lifecycle

Reproduce asexually (live birth, no eggs). Mature in 7-10 days. Population doubles every 2-3 days. Winged adults appear when crowded.

💊 Treatment Protocol

Immediate: Safer Brand insecticidal soap. Spray every 2-3 days for 2 weeks. Breaks down quickly.

Alternative: Lost Coast Plant Therapy, Neem oil products (veg only), Pyrethrin products (knock-down).

Biological: Ladybugs (release 1,500+ per room at dusk). Aphidius wasps (parasitize aphids). Lacewing larvae.

Prevention: Scout weekly. Catch early before colonies establish. Isolate infected plants immediately.

🦋

Whiteflies

MEDIUM THREAT

🔍 Identification

Tiny white flies (1-2mm) on leaf undersides. Fly in a cloud when plant is disturbed. Nymphs are scale-like, immobile, yellow/white on leaves.

⚠️ Damage Symptoms

Yellowing leaves from sap-sucking
Honeydew → sooty mold
Stunted growth, leaf drop
Transmit plant viruses

🔄 Lifecycle

Egg to adult in 25-30 days (temp dependent). 4 nymphal stages. Eggs and nymphs on leaf undersides. Adults are mobile, difficult to spray.

💊 Treatment Protocol

Systemic: SNS 209 (rosemary oil, root drench). Works on nymphs and adults. Apply 2-3 times, 5 days apart.

Foliar: Athena IPM, Lost Coast Plant Therapy, insecticidal soap. Must contact insects directly.

Monitoring: Yellow sticky traps (horizontal placement near canopy). Track population levels.

Biological: Encarsia formosa (parasitic wasp). Release 3-5 per plant. Delphastus (predatory beetle).

🔬

Broad Mites / Russet Mites

EXTREME THREAT

🔍 Identification

MICROSCOPIC - cannot see with naked eye. Need 60x+ magnification. Look for SYMPTOMS: twisted new growth, downward leaf curl, wet/glossy appearance, rust-colored stems.

⚠️ Damage Symptoms

Twisted, deformed new growth
Leaves curl down and inward ("taco")
Wet, glossy appearance (toxins)
Rust/brown stems and petioles
Stunted growth, brittle leaves

🔄 Lifecycle

Egg to adult in 5-7 days. Females lay 30-50 eggs. Live in growing tips. Spread by contact or air currents. Extremely fast reproduction.

💊 Treatment Protocol

Aggressive Spray: Athena IPM or Lost Coast Plant Therapy EVERY DAY for 5-7 days. Drench growing tips thoroughly.

Alternative: Sulfur products (NOT in flower). Wettable sulfur foliar.

Biological: Amblyseius swirskii (predatory mite). Release EARLY and HEAVY (20+ per plant).

⚠️ CRITICAL: Extremely difficult to eradicate. Many growers scrap entire crop. PREVENTION IS EVERYTHING. Quarantine new plants 2 weeks minimum.

🪱

Root Aphids

HIGH THREAT

🔍 Identification

White/gray soft-bodied insects on roots. Waxy white coating. Check root ball for clusters. Often mistaken for beneficial nematodes or root hairs.

⚠️ Damage Symptoms

Wilting despite wet soil
Slow growth, nutrient deficiencies
Yellow leaves, stunted plants
Honeydew on root surface attracts ants

🔄 Lifecycle

Live on roots, reproduce asexually. Winged adults emerge when population explodes. Spread to nearby plants via soil contact.

💊 Treatment Protocol

VERY DIFFICULT: BioSafe SaniDate root zone drench (diluted). Apply 2-3 times, 5-7 days apart. May damage roots.

Biological: Beneficial nematodes (Steinernema feltiae). Drench heavily. Stratiolaelaps predatory mites (soil-dwelling).

Systemic: SNS 209 drench (some success reported, not guaranteed).

⚠️ WARNING: Extremely hard to eliminate. Often requires destroying crop. Best defense = prevention. Sterilize media, inspect clones thoroughly.

🦠 Diseases & Fungal Pathogens

Identification and treatment for common diseases. Remember: Prevention is easier than cure!

☁️

Powdery Mildew (PM)

HIGH THREAT

🔍 Identification

White powdery spots on leaves, stems, buds. Starts as small circles, spreads to cover entire leaf. Looks like flour or talc powder sprinkled on plant.

⚠️ Damage Symptoms

White powder on leaf surface (both sides)
Reduced photosynthesis → yellowing
Leaves curl, dry out, die
Can spread to buds (devastating in flower)

🔄 Conditions That Favor PM

High humidity (>60%) + poor airflow + moderate temps (65-80°F). Low light. Overcrowded canopy. Spores spread through air.

💊 Treatment Protocol

Active Treatment (Veg): BioSafe ZeroTol (hydrogen dioxide). Spray every 3 days, 3 applications. Kills on contact.

Prevention: Regalia (biocontrol fungicide, OMRI). Spray weekly. Creates systemic resistance. Athena IPM weekly spray.

Supplements: SNS 244 (botanical fungicide). Sulfur vaporizers (veg only, NEVER in flower).

Environmental: Drop humidity <50% in flower. Increase airflow (AC Infinity fans). Manage VPD. Prune for air penetration.

⚠️ In Flower: Very limited options after week 3. ZeroTol safe until harvest but requires thorough rinsing. PREVENTION IS CRITICAL.

🍄

Botrytis (Bud Rot / Gray Mold)

EXTREME THREAT

🔍 Identification

Gray fuzzy mold INSIDE buds. Buds turn brown/dead in spots. Infected areas are soft, fall apart easily. Spreads rapidly in late flower.

⚠️ Damage Symptoms

Brown/dead spots inside dense buds
Gray fuzzy mold (visible when bud is opened)
Entire colas can rot overnight
Musty smell (different from mildew)

🔄 Conditions

High humidity (>50% in late flower) + dense buds + poor airflow. Cool nights + warm days = condensation inside buds. Catastrophic in week 6-8 of flower.

💊 Treatment Protocol

⚠️ NO CURE IN FLOWER: Once bud rot appears, that bud CANNOT be saved. Cut out infected area 2-3 inches below visible mold. Discard immediately in sealed bag.

Prevention (Veg/Early Flower): BioSafe ZeroTol foliar (until week 3). Regalia weekly spray.

Environmental (CRITICAL): Keep humidity <50% in flower (Quest/Anden dehumidifiers). Increase airflow dramatically (oscillating fans, AC Infinity exhaust). Prune lower growth. Thin canopy for airflow. Monitor VPD religiously.

⚠️ Why You Can't Spray in Flower: Residue on buds. Risk of smoking/inhaling fungicides. Plus, mold is INSIDE buds—foliar spray won't reach it.

🌊

Root Rot (Pythium)

HIGH THREAT

🔍 Identification

Brown, slimy roots (healthy = white/cream). Foul smell (rotten). Roots fall apart easily. Reservoir/water turns murky brown. More common in DWC/hydro.

⚠️ Damage Symptoms

Wilting despite wet media
Yellowing, drooping leaves
Slow/stunted growth
Plant can't uptake water/nutrients
Death if untreated

🔄 Conditions

Warm water (>72°F) + low dissolved oxygen + overwatering (soil) + pathogens (Pythium, Fusarium). Spreads rapidly in hydroponic systems.

💊 Treatment Protocol

Immediate: BioSafe ZeroTol or SaniDate reservoir/media drench. Kill pathogens. Change reservoir completely (hydro).

Beneficial Microbes: Real Growers Recharge, Fish Sh!t (beneficial bacteria outcompete pathogens). Add after sterilizing.

Hydroguard: Bacillus amyloliquefaciens (beneficial bacteria for hydro). Add to every reservoir change.

Prevention: Keep reservoir <68°F (chillers). Increase dissolved oxygen (air stones, waterfalls). Don't overwater (soil). Sterilize equipment between grows. H2O2 maintenance dosing.

🥀

Fusarium / Verticillium Wilt

HIGH THREAT

🔍 Identification

Wilting despite adequate water. Brown/black discoloration inside stem (vascular tissue). Cut stem and look for brown streaks. Affects one side of plant first.

⚠️ Damage Symptoms

Sudden wilting (one branch or side first)
Yellow leaves, brown veins
Vascular browning visible in stem cut
Progressive death of plant

🔄 Spread

Soil-borne pathogens. Enter through roots. Clog vascular system. Spread by contaminated tools, soil, water. Can persist in soil for years.

💊 Treatment Protocol

⚠️ NO CURE: Once established, plant cannot be saved. Remove and destroy infected plants immediately. Do not compost.

Prevention: Sterilize all media and equipment. Use clean water source. Beneficial microbes (Recharge, Fish Sh!t) create competitive environment. BioSafe products for media sterilization pre-planting.

Critical: Sterilize tools with 10% bleach between cuts. Don't reuse soil from infected plants. Quarantine new genetics.

🌱

Damping Off

MEDIUM THREAT

🔍 Identification

Seedlings fall over at soil line. Stem appears pinched/rotted at base. Fuzzy mold may be visible. Happens suddenly overnight.

⚠️ Damage Symptoms

Seedling stem rots at soil line
Plant falls over, can't stand
Brown/black discoloration at base
Death within 24-48 hours

🔄 Causes

Fungi (Pythium, Fusarium, Rhizoctonia) in soil. Overwatering + poor drainage + low airflow. Cold, damp conditions.

💊 Treatment & Prevention

Prevention: Sterilize media. BioSafe SaniDate light drench after planting. Proper airflow. Don't overwater seedlings.

Environmental: Keep seedlings warm (75-80°F). Good airflow (fan, not direct). Let media surface dry slightly between waterings.

No cure once damping off occurs. Remove dead seedlings immediately to prevent spread.

🟤

Septoria Leaf Spot

LOW THREAT

🔍 Identification

Brown/yellow spots on lower leaves with dark borders. Spots have gray/white centers. Starts on oldest leaves, works upward.

⚠️ Damage Symptoms

Yellow spots with dark edges on leaves
Spots grow, merge together
Leaves turn yellow, die, fall off
Moves up plant if unchecked

🔄 Spread

Fungal pathogen. Spread by water splash (overhead watering). Favors wet, humid conditions. Spores overwinter on plant debris.

💊 Treatment Protocol

Remove Affected Leaves: Cut off infected leaves and dispose. Don't compost. Prevents spread.

Spray: BioSafe ZeroTol foliar. Regalia for prevention. Weekly applications.

Prevention: Avoid overhead watering. Improve airflow (AC Infinity fans). Remove lower leaves preemptively. Keep room clean (no debris).

🛡️ Integrated Pest Management (IPM) Strategy

Prevention is 90% of the battle. The IPM Pyramid: start at the bottom, move up only when necessary.

🌱 Level 1: Cultural Controls (Foundation)

The most important layer. Create an environment that doesn't favor pests/disease.

Room cleanliness: Sterilize between crops. Remove all plant debris. Wipe down walls, floors, equipment with bleach solution.
Quarantine new plants: 2-week isolation minimum. Inspect thoroughly before introducing to main room.
Proper environment: Manage VPD, temperature, humidity. Good airflow with AC Infinity fans. Avoid temperature swings.
Healthy plants resist pests: Proper nutrition, don't overwater, manage stress. Strong plants have natural defenses.
Genetics: Choose disease-resistant strains when possible.

🔍 Level 2: Physical/Mechanical Controls

Non-chemical interventions. Monitoring and physical barriers.

Weekly scouting: Inspect plants every 3-5 days. Use magnification (60x loupe). Check undersides of leaves, new growth, soil surface.
Sticky traps: Yellow (fungus gnats, whiteflies, aphids), Blue (thrips). Monitor and catch early.
Remove affected leaves: Cut out infected areas immediately. Bag and remove from grow space.
Air filtration: HEPA filters on intakes. Carbon filters prevent spore/pest entry from outside.
Diatomaceous earth: Soil top-dress for crawling insects. Physical barrier.

🐞 Level 3: Biological Controls

Use natural predators. Living organisms that eat pests. Best for prevention.

Beneficial insects: Release EARLY (before you see pests). See Beneficial Insects section below for details.
When to use biologicals: Best in veg or early flower. Not effective in active infestations (too late). Preventive, not curative.
Can't mix with sprays: Most sprays kill beneficials too. Choose biologicals OR sprays, not both simultaneously.
Beneficial microbes: Recharge, Fish Sh!t (root zone health, outcompete pathogens).

💊 Level 4: Chemical Controls (Last Resort)

Only when other methods fail. Rotate products to avoid resistance.

Start with least toxic: Insecticidal soap, botanical oils (Lost Coast Plant Therapy), BioSafe products.
Rotate modes of action: Don't use same product repeatedly. Pests develop resistance. Rotate between 3+ different products.
Follow label directions: Dosage, frequency, safety intervals. More is NOT better.
Never spray after week 3 of flower: Residue on buds. Safety concern. Prevention must happen BEFORE flower.
Spray rotation example: Week 1: Athena IPM → Week 2: Lost Coast → Week 3: SNS 203 → Week 4: Athena IPM (repeat cycle).

📋 Room Hygiene & Scouting Protocol

Frequency	Task	What to Look For
Every 3-5 days	Scout plants thoroughly	Undersides of leaves (mites, thrips, whiteflies), new growth (aphids, mites), soil surface (fungus gnats), stems (aphids)
Weekly	Check sticky traps	Count insects. Sudden spike = problem developing. Replace traps when full.
Weekly (veg)	Preventive spray rotation	Athena IPM, Lost Coast, SNS 203 (rotate). Leaf tops AND undersides.
Daily	Visual check	Overall plant health. Wilting, discoloration, unusual growth.
Between crops	Deep clean room	Bleach solution (10%) on all surfaces. Remove all debris. Sterilize tools, pots, trays. Let room dry completely before new crop.

🗓️ Spray Schedule Templates

Preventive and active infestation protocols. ⚠️ NEVER spray after week 3 of flower.

🟢 Preventive Spray Schedule (Vegetative Stage)

Goal: Prevent pests before they arrive. Weekly rotation to avoid resistance.

Week	Product	Dosage	Targets	Notes
Week 1	Athena IPM	2-3 ml/L	Mites, thrips, aphids, PM	Spray to runoff, tops + undersides
Week 2	Lost Coast Plant Therapy	2 oz/gal	Broad spectrum (mites, PM, insects)	Lights off, don't spray in direct sun
Week 3	SNS 203 (foliar)	4-6 oz/gal	Mites, aphids, whiteflies	Concentrated rosemary extract
Week 4	Regalia	0.5-1.0 oz/gal	PM prevention, plant immunity	Biofungicide, systemic resistance
Week 5	Athena IPM	2-3 ml/L	Repeat cycle	Back to week 1, continue rotation

Application tips: Spray in evening or lights-off. Spray both sides of leaves. Rotate products weekly to prevent resistance. Continue through veg and early flower (until week 3).

🔴 Active Infestation Protocol (Aggressive Treatment)

Goal: Knock down active pest population quickly. Every 3 days until eradicated.

Day	Product	Dosage	Application	Notes
Day 1	Lost Coast Plant Therapy	3 oz/gal (high dose)	Drench entire plant, top + bottom	Kills on contact
Day 4	Athena IPM	3 ml/L	Full coverage	Different mode of action
Day 7	Lost Coast Plant Therapy	3 oz/gal	Repeat	Catches eggs that hatched
Day 10	SNS 217 (spider mites) OR Nuke Em	Per label	Full coverage	Continue rotating
Day 13	Lost Coast Plant Therapy	3 oz/gal	Final application (if needed)	Should see major reduction by now

⚠️ Critical: Scout daily during treatment. If no improvement after 3 applications, pest may be resistant—switch product families. Consider scrapping crop if broad/russet mites.

🌸 Flower-Safe Spray Options (Week 1-3 ONLY)

⚠️ STOP ALL SPRAYS after week 3. Residue on buds is unacceptable. Prevention must happen BEFORE flower.

Product	Flower Safe?	Last Application	Pre-Harvest Interval
Lost Coast Plant Therapy	YES (early flower)	Week 3 of flower MAX	3 weeks minimum
Athena IPM	YES (early flower)	Week 3 of flower MAX	3 weeks minimum
Regalia	YES (until week 4)	Week 4 of flower	0 days (OMRI, biopesticide)
BioSafe ZeroTol	YES (with caution)	Safe until harvest (rinse thoroughly)	0 days (breaks down to water/oxygen)
SNS 203 / SNS 217	NO (veg only)	Last week of veg	4 weeks minimum
Neem Oil products	ABSOLUTELY NO	Veg only	Never in flower (residue, taste)
Sulfur (any form)	ABSOLUTELY NO	Veg only	Never in flower (combustion hazard)
Pyrethrin products	NO	Veg / early flower (week 1-2 max)	4-6 weeks

Why stop spraying in flower? 1) Residue on buds (health risk). 2) Alters taste/smell. 3) Buds can trap moisture → bud rot risk. 4) Most products not tested for smoking/vaporizing safety.

If you have pests in late flower: You're out of options. Either harvest early or accept the loss. This is why PREVENTION and EARLY DETECTION are critical.

🐞 Beneficial Insects & Biological Controls

Natural predators that eat pests. Best used PREVENTIVELY (before you see pests). Living IPM solutions.

🕷️

Phytoseiulus persimilis

Targets: Two-spotted spider mites

Best for: Active spider mite infestations (hot conditions 70-80°F)

Release rate: 5-10 per plant initially, repeat in 2 weeks if needed

Notes: Specialist predator. Eats ONLY spider mites (but eats them fast—up to 20/day). Reddish color, moves quickly.

🕸️

Neoseiulus californicus

Targets: Spider mites (all stages), thrips (some)

Best for: Preventive control in cooler temps (60-80°F)

Release rate: 2-5 per plant, preventively

Notes: Generalist. Survives when prey is low (eats pollen). Good for long-term prevention. Slower than Persimilis but more versatile.

🦟

Amblyseius swirskii

Targets: Whiteflies, broad mites, thrips

Best for: Warm climates (77-86°F), broad mite prevention

Release rate: 50-100 per plant for broad mites (HEAVY), 10-20 for prevention

Notes: One of the few predators effective against broad mites. Release EARLY before infestation. Needs warmth to thrive.

🪲

Amblyseius cucumeris

Targets: Thrips (larvae), spider mites (some)

Best for: Thrips prevention in flowers/growing tips

Release rate: 50-100 per plant, repeat weekly

Notes: Lives in flowers/buds where thrips hide. Eats thrips larvae before they cause damage. Cooler temps (60-75°F).

🦠

Stratiolaelaps scimitus

Targets: Fungus gnat larvae, thrips pupae, root aphids

Best for: Soil-dwelling pests (lives in soil)

Release rate: 10-20 per sq ft of soil surface

Notes: Lives in soil, hunts larvae/pupae. Long-lived (weeks-months). Great preventive for soil growers. Can establish population if conditions right.

🐞

Ladybugs (Hippodamia convergens)

Targets: Aphids, whiteflies, small caterpillars, mites (some)

Best for: Aphid infestations

Release rate: 1,000-5,000 per room (release at dusk when cool)

Notes: Adults fly away unless food present. Release at night, mist plants first. Larvae (alligator-shaped) eat more than adults. Short-term solution.

🪰

Encarsia formosa

Targets: Whitefly nymphs (parasitizes)

Best for: Greenhouse whitefly control

Release rate: 3-5 per plant, weekly releases

Notes: Parasitic wasp (tiny, doesn't sting humans). Lays eggs inside whitefly nymphs. Takes 2-3 weeks to see results. Needs warmth (70-80°F).

🐝

Aphidius colemani

Targets: Aphids (parasitizes)

Best for: Aphid control (all species)

Release rate: 0.5-2 per plant, preventive

Notes: Parasitic wasp. Lays eggs in aphids → aphid becomes "mummy" (tan/brown shell). Good for long-term control. Repeat releases every 2 weeks.

🐞 How to Use Beneficial Insects Effectively

1. Release EARLY (preventively): Don't wait until you have an infestation. Beneficials work best when pest populations are low.
2. Stop spraying 1 week before release: Most sprays kill beneficials too (even organic ones). Let spray residue dissipate.
3. Provide habitat: Beneficials need pollen, humidity, hiding spots. Don't over-prune. Mist lightly.
4. Repeat releases: Most beneficials don't establish permanent populations indoors. Release every 2-4 weeks for continuous protection.
5. Be patient: Takes 1-3 weeks to see results. Not a quick fix. Best for prevention and long-term control.
6. Where to buy: Toledo Indoor Garden can order beneficial insects for you. Call 419-725-2450 to order.

🌡️ Environmental Controls: The Foundation of IPM

Your environment is your first line of defense. Most pests and diseases thrive in specific conditions. Control the environment, control the problems.

📊 VPD (Vapor Pressure Deficit)

Why it matters: VPD = balance between temp and humidity. Proper VPD prevents powdery mildew, bud rot, and stress that weakens plants.

Target ranges:

Seedling: 0.4-0.8 kPa
Veg: 0.8-1.2 kPa
Flower: 1.0-1.5 kPa
Late Flower: 1.2-1.6 kPa (lower humidity)

Tools: Use VPD calculator (see our VPD Guide). Monitor with quality hygrometer.

Products we carry: AC Infinity controllers (auto VPD management), Quest/Anden dehumidifiers, Inkbird controllers.

💨 Airflow & Circulation

Why it matters: Stagnant air = fungal disease (PM, botrytis). Good airflow prevents spore germination and strengthens stems.

Requirements:

Oscillating fans (multiple, different heights)
Exhaust fan sized for room (CFM = room volume × 1-3 air changes/min)
Intake (passive or active) for fresh air
Canopy defoliation for air penetration

Products we carry: AC Infinity CloudLine exhaust fans (smart controllers), Hurricane oscillating fans, wall-mount fans, clip fans.

💧 Humidity Control (Critical in Flower)

Why it matters: High humidity in late flower = bud rot (botrytis). THE #1 cause of crop loss in late flower.

Target humidity:

Veg: 60-70%
Early Flower (weeks 1-4): 50-60%
Late Flower (weeks 5-8): 40-50%
Final 2 weeks: 35-45% (if possible)

Products we carry: Quest dehumidifiers (commercial), Anden dehumidifiers, AC Infinity humidifiers (veg), hygrometers.

🌡️ Temperature Management

Why it matters: Pests thrive in specific temps. Spider mites explode above 80°F. Pythium loves warm water (>72°F).

Ideal ranges:

Lights on: 72-78°F (most stages)
Lights off: 65-70°F (avoid >10°F drop)
Reservoir/water: 65-68°F (hydro)
Late flower: 68-75°F (cooler = terpene preservation)

Products we carry: AC Infinity controllers (exhaust + cooling), portable AC units, heaters, water chillers (hydro).

🧼 Cleanliness Protocols

Why it matters: Pests/pathogens hide in debris, overwinter in cracks. Deep cleaning between crops prevents recurring problems.

Between crops:

Remove ALL plant material (bag and dispose)
Bleach solution (10%) on walls, floors, equipment
Sterilize pots, trays, tools (bleach or H2O2)
Replace/clean filters (exhaust, carbon, HEPA)
Let room dry completely (24-48 hrs) before new crop

During crop: Remove dead/dying leaves immediately. Sweep floors weekly. Sterilize tools between plants (10% bleach).

🌬️ Air Filtration

Why it matters: Prevent pests/spores from entering room through intake air.

Recommended:

HEPA filter on intake (blocks spores, insects)
Carbon filter on exhaust (odor control, secondary filtration)
Sealed room = ultimate control (CO2 enrichment)

Products we carry: Can Filters (carbon), Phat Filters, Phresh Filters, AC Infinity filters, replacement pre-filters.

📦 Product Quick Reference: What to Use When

All products Toledo Indoor Garden carries. Comparison of application, targets, and safety.

Product Name	Brand	Target Pests/Diseases	Application Method	Frequency	Flower Safe?	Pre-Harvest
Athena IPM	Athena	Mites, thrips, aphids, PM	Foliar spray (2-3 ml/L)	Weekly (preventive) / Every 3 days (active)	Week 1-3 only	3 weeks
Lost Coast Plant Therapy	Lost Coast	Broad spectrum (mites, PM, insects)	Foliar spray (2-3 oz/gal)	Every 3 days (active), weekly (preventive)	Week 1-3 only	3 weeks
SNS 203	Sierra Natural Science	Mites, aphids, whiteflies	Foliar spray (4-6 oz/gal)	Weekly	Veg only	4 weeks
SNS 209	Sierra Natural Science	Thrips, whiteflies, fungus gnats (systemic)	Soil drench (4-8 oz/gal)	Every 3-5 days for 2-3 weeks	Yes (soil drench)	2 weeks
SNS 217	Sierra Natural Science	Spider mites (specialized)	Foliar spray	Every 3 days	Veg only	4 weeks
Mammoth CannControl	Mammoth	Mites, PM, broad spectrum	Foliar spray	Per label	Early flower	Check label
Nuke Em	Flying Skull	Mites, PM, aphids, thrips	Foliar spray	Every 3 days	Week 1-3	3 weeks
Regalia	Marrone Bio	PM, botrytis (prevention), systemic resistance	Foliar spray (0.5-1 oz/gal)	Weekly	Until week 4	0 days (OMRI)
Safer Brand Soap	Safer	Aphids, whiteflies, soft-bodied insects	Foliar spray	Every 2-3 days	Week 1-2	2 weeks
BioSafe ZeroTol	BioSafe Systems	PM, botrytis, algae, bacteria	Foliar spray / drench (diluted)	Every 3-5 days	Yes (rinse well)	0 days (H2O2)
BioSafe SaniDate	BioSafe Systems	Root rot, Pythium, pathogens	Root zone drench / reservoir	Per label	Yes (roots)	0 days
BioSafe OxiPhos	BioSafe Systems	Pythium, Phytophthora, downy mildew	Foliar + drench	Per label	Veg only	Check label
Mosquito Bits / Gnatrol	Summit / Valent	Fungus gnat larvae (BTI)	Top-dress or tea drench	Every 5-7 days until gone	Yes	0 days
Diatomaceous Earth (DE)	Various	Crawling insects (physical barrier)	Dust on soil surface	Reapply after watering	Yes	0 days
Real Growers Recharge	Real Growers	Root health, outcompete pathogens	Soil drench / tea	Weekly	Yes	0 days
Fish Sh!t	Fish Head Farms	Root health, beneficial bacteria	Add to water/reservoir	Every watering (low dose)	Yes	0 days
Neem Oil products	Various	Broad spectrum insects, some fungi	Foliar spray (diluted)	Weekly (veg)	NEVER	Never in flower
Pyrethrin products	Various (Bonide, etc.)	Fast knock-down (flies, aphids, beetles)	Foliar spray	As needed (fast-acting)	Veg only	4-6 weeks

⚠️ Important Product Safety Notes

Always read labels: Follow manufacturer dosage and safety instructions. More is NOT better.
Wear PPE: Gloves, mask, eye protection when spraying. Even "organic" products can irritate skin/lungs.
Spray in evening/lights-off: Prevents leaf burn. Allow leaves to dry before lights on.
Test spray: On 1-2 plants first to check for phytotoxicity (leaf damage).
Never mix products: Unless label specifically says compatible. Chemical reactions can be dangerous.
Store safely: Cool, dry place. Out of reach of children/pets. Check expiration dates.

🔍 What's Wrong With My Plant?

Select symptoms you're seeing to get likely causes and treatment recommendations

🔴

Spots on Leaves

🟡

Yellowing Leaves

🍃

Curling Leaves

🕸️

Webbing/Silk

🦟

Flying Insects

🥀

Wilting

☁️

White Powder/Mold

🌀

Twisted Growth

💧

Sticky Residue

🟤

Brown/Dead Buds

Still Have Questions?

Our team of expert growers is here to help — no question is too basic or too advanced

Call Growers Hotline 💬 24/7 Grow Expert 🏠 Visit Store

Need IPM Products?

We carry everything on this guide. From sprays to beneficial insects, environmental controllers to testing equipment. Expert advice included.

Call 419-725-2450 Visit Store

📍 5520 Secor Rd, Toledo, OH 43623 | Mon-Fri 9AM-6PM, Sat 10AM-6PM, Sun Closed